The New PFHE Gearbox from Neugart - an attractive alternative for high radial loads

Neugart GmBH has released the Flange-face Economy Gearbox PFHE as a standard product. This new product release allows Neugart to extend the range with a flange gearbox in the Economy model series which specialises in applications with extremely high radial loads.

The PFHE represents an economically attractive alternative for high-load applications in which high radial loads occur. The combination of special pre-stressed tapered roller bearings and a flanged output shaft in accordance with EN ISO 9409-1 gives the PFHE a very high load capacity.

The PFHE planetary gear has two special pre-stressed tapered roller bearings. These can absorb a considerable amount of force in spite of their compact design. Because of this, the new development at the output can tolerate radial force of up to 5100 N, like the force which typically occurs in drives or applications with a pinion or a belt pulley.

The problem-free connection with the drive flange makes it possible to have a mechanical interface (without a dowel pin drill hole) that is standardised in accordance with EN ISO 9409-1. This allows the gearbox to be integrated in an extremely quick and easy manner and the drive flange can be individually adapted to the respective motor.

The PFHE gearbox has a radial shaft seal which fulfils the requirements of protection class IP65 at the output side. Dust and water spray do not affect the functionality, meaning the gearbox is also suitable for use in adverse ambient conditions. The PFHE operates maintenance free due to having lifetime lubrication. As a straight-toothed gearbox it provides a high performance density.

Neugart’s wide range of planetary gearboxes is being extended further with the PFHE. As an additional constituent of the Economy Line, it provides all of the advantages of the known and well-tested product line, which represents long-lasting and powerful standard gearboxes with an outstanding price/performance ratio. The model is available in three sizes with an optional centering collar diameter 64, 90 or 110 mm at the output flange and for 1- or 2-stage ratios of i=3 to=100. The PFHE combines the extremely compact design of the existing PLFE gearbox with a more powerful output.


Authorised Distribution Partner For